Select stainless steel plate to consider the use of operating conditions, such as manual operation or automatic operation, the performance and type of hot press, the quality of the pressing material requirements such as hardness, luster and so on.
Also consider economic accounting, each new grinding steel plate, the requirements can produce a slow quality of decorative board times.
In addition, when selecting the most reasonable thickness of the steel plate, the use time, quality and stiffness should be considered, taking into account the strength requirements of the plate under pressure, the heat conduction performance, the distribution of pressure, the amplitude specification of the press plate. If the steel plate thickness is not enough, easy to bend, the potential will affect the production of decorative plate. If the thickness is too large, the steel plate is too heavy, not only to increase the cost of the steel plate, but also to the operation of the difficulties can not be played. At the same time, we should also consider the stainless steel plate processing or use of the residual amount should be left. The thickness of the copper plate is not absolutely consistent, but strive to be as consistent as possible in the thickness of the same plate, generally medium specification of the saw plate, thickness tolerance of 0.05 o.15 mm. If the requirements are too strict, the grinding cost will also increase. Generally is a large anti-tension, strong hardness of the steel plate, the greater the resistance to mechanical damage, the use of longer durability, but grinding electrocuted processing costs are also relatively high